How to make a String Flogger

I went to home depot (Dom depot) recently and they had twine/kite string in neon green, bright yellow and hot pink for a $1.00 for a 225 feet. I also got black electrical tape there – a role for 45 cents. You can then get O rings there or go to a craft store and get keyrings/O rings a bunch for about $2.

The length of the fall is usually from 6″ to 2′ or so. Longer fall can build up more speed, but are more difficult to control. Number of falls is typically between twenty and sixty or so. More numerous fall equals more thud. The handle length (which is part of the falls so add to the fall length can be between 4 and 8 inches. Totally personal preference.

You start by cutting the twine. The one I made recently was 18″ that was falls and handle together. I cut the twine 36″ though and just double it over. I cut 25 36″ pieces. I lay them out as neat as I can get them and then slip the O ring over one end and bring it to the middle. I then pick it up by the O ring and kind of shake it light to so all the falls untangle.

You then can either do the easy method of making a handle or the slightly less easy but still easy.

Easy Method would be taking electrical tape and just start wrapping from the just below the O ring down anywhere from 4 to 8 inches depending on how long you have made your flogger and how long you want the handle to be. Make sure you wrap fairly tightly. On the one I made I wrapped the electrical tape down about 4 ½ inches.

The other method that is easy but harder then the last is to take the string coming from the spool and tie it off just under the O ring and then start wrapping down. Make sure the piece of string that on the one end that was free when you tied it off gets wrapped over. When you have wrapped your desired length cut the end off but with about a ½ of inch extra. Loosen some of the end wrap but not too much and slide that ½ inch under them and then pull so the wraps are tight around the string.

And you are now ready to flog your submissive. To make it good for a cool down dip it in ice cold water.

© within Reality: danae 2000 – all rights reserved

One thought on “How to make a String Flogger

  1. Pingback: DIY BDSM Toy Instructions Online | Submissive Guide

Comments are closed.